Home » Galvanized Duct, Pipe & Fittings » Round » Collars & Take-Off's
Collars & Take-Off's
Top Take-Off
Top Take-Off
  • Used to tap into the top of trunk duct.
  • Forms a transition from rectangular to
    round branch duct.
  • Used when branch ducts are to be located
    within a joist space.
     
Sizes (30 ga)
GV0968    4"
GV0969    5" 
GV0970    6" 
GV0971    7" 
GV0972    8" 
Sizes (28 ga)
GV0974    10" 
GV0975    12" 
Side Take-Off
Side Take-Off
  • Used for transition from air plenums or rectangular duct to round pipe or insulated duct.
     
Sizes (30 ga)
GV0957    4" 
GV0958    5" 
GV0959    6" 
GV0960    7" 
GV0961    8" 
Sizes (28 ga)
GV0963    10" 
GV0964    12" 
GV0965    14" 
Angle Take-Off 45°
Angle Take-Off 45°
  • Used for transition at a 45° angle from the top
    of rectangular duct to round pipe or insulated flexible duct.
     
 
Sizes (30 ga)
GV0946    4" 
GV0947    5" 
GV0948    6" 
Adjustable Take-Off
Adjustable Take-Off
  • Used for transition from rectangular duct to round pipe or insulated flexible duct.
  • Adjustable from 0° to 90°.
     
Sizes (30 ga)
GV0946    4"
GV0947    5" 
GV0948    6" 
Adjustable Take-Off - Full Tab & 1/2 Tab
Adjustable Take-Off - Full Tab & 1/2 Tab
  • Used for transition from rectangular duct to round pipe or insulated flexible duct.
  • Adjustable from 0° to 90°.
     
Sizes
GV2113   6" x 7" (half tab)
GV2112   6" x 7" (full tab)
Round Collar
Round Collar
  • Use for transition from rectangular duct
    to round pipe.
     
Crimped
GV0838    3" 
GV0839    4" 
GV0841    5" 
GV0843    6" 
 
No crimp
GV1597    5" 
GV1283    6" 
GV1598    7" 
Crimped
GV0845    7" 
GV0846    8" 
GV0848    10" 
GV0849    12" 
 
No crimp
GV1284    8"
GV1282   10"
Spin Collar with Damper
Spin Collar with Damper
  • Spun into to a round hole cut into rectangular trunk duct.
  • Provides a round transition with a means (damper) to adjust air volume.
     
Sizes (24 ga)
GV0851     4"
GV0852     5"
GV0853     6"
GV0855     8"
GV0857     10"
GV0858     12"
GV0859     14"
Drawband (with nut & bolt)
Drawband (with nut & bolt)
  • Used to connect two pieces of pipe and/or pipe fittings.
  • Bolt type used when a heavy-duty connection is needed on heavier gauges.
     
Sizes
GV1072     6"
GV1314     8"
Round()
+
-
Pipe & Elbows
+
-
Transitions & Connectors
+
-
Register Boots
+
-
Collars & Take-Off's
+
-
Dampers & Caps
Imperial Group
Head Office & Customer Service
1.800.561.3100
Stay
connected
Home
Company
Opportunities
Contact us
Site Map
Support
Awards & Accolades
In the Community
What's New?
Upcoming Events
Registers & Grilles
Venting & Flexible Duct
Stove
Fireplace
Greentek
Imperial Air Technologies
Railing, Columns & Fencing
Galvanized Duct, Pipe & Fittings
Steel Stud, Channel & Trim
Air Filtration
© 2017 Imperial Manufacturing Group|All rights reserved|A NuFocus Online Solution
Content Support
E-mail Now