Home » Stove & Fireplace » Stove » Stove Boards and Heat Shields » Stove Board Joiner Kit
Stove Board Joiner Kit
Stove Board Joiner Kit

 


NOTE

 

If side being joined is over 28" (71.1 cm) wide,
follow steps (1) to (3) using both flat strips in kit
and overlap the strips.

Remove the backing from the adhesive tape in
the kit and adhere the two metal strips together.

 

Overview

  • For floor application
  • Use with Imperial Stove Boards
     

This package contains:

  • 2 "A" clips
  • 2 metal strips
  • adhesive tape strips
     

Instructions

        Place stove boards to be joined metal face down
        on a flat surface.

 

        Insert the "A" clip into the metal edges of seam
        on both sides.

 

        Insert metal strip into the metal clips as shown.
        The stove boards are now ready to be placed
        in location.

 

INSTALL METAL SURFACE UP TOWARDS STOVE.

Stove Boards and Heat Shields()
• Stove Boards & Heat Shields (Type 1)
• Stove Boards & Heat Shields (Type 2)
• Stove Pipe Adjustable Heat Shield
• Stove Pipe Elbow Heat Shield
• Stove Board Joiner Kit
• Stove Board Wall Spacing Kit
Downloads
2017 Stove & Fireplace Maintenance products Catalogue 2017 Stove & Fireplace Maintenance products Catalogue 4.36 MB
Stove Board Installation Instructions (English/French) Stove Board Installation Instructions (English/French) 0.47 MB
Typical single-wall stove pipe installations Typical single-wall stove pipe installations 0.86 MB
Imperial Group
Head Office & Customer Service
1.800.561.3100
Stay
connected
Home
Company
Opportunities
Contact us
Site Map
Support
Awards & Accolades
In the Community
What's New?
Upcoming Events
Registers & Grilles
Venting & Flexible Duct
Stove
Fireplace
Greentek
Imperial Air Technologies
Railing, Columns & Fencing
Galvanized Duct, Pipe & Fittings
Steel Stud, Channel & Trim
Air Filtration
© 2017 Imperial Manufacturing Group|All rights reserved|A NuFocus Online Solution
Content Support
E-mail Now