Home » Stove & Fireplace » Stove » Maintenance Products » Silicone Sealant » Hi-temperature Silicone Sealant (red)
Hi-temperature Silicone Sealant (red)
Hi-temperature Silicone Sealant (red)

Listing

Tube
KK0321     80 mL (US 2.7 fl. oz.) 

Cartridge
KK0205     304 mL (US 10.3 fl. oz.)
 


 

MAY IRRITATE EYES. MAY IRRITATE SKIN. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS. Do not mix with other household chemicals. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children. 

FIRST AID TREATMENT: Contains Dimethyl Siloxane Hydroxy Terminated, Ethyltriacetoxy Silane and Methyltriacetoxy Silane. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for at least 15 minutes. If on skin, rinse well with water.



Tube: Meets the requirements of MIL-A-46106A, Amendment2, Type 1.

Cartridge: Meets the requirements of MIL-A-46106A, Amendment 2, Type 1.
Authorized by the United States Department of Agriculture for use in federally inspected meat and poultry plants. Certified by NSF.
Agriculture Canada Approved.

Overview


Applications

High Temperature Silicone Sealant for any application that requires a permanently flexible waterproof seal that will withstand moisture, heat and vibration. Adheres to clean metal, glass, most types of wood, ceramic, plastic, brick and slate. Fully cured, it can be used for extended periods at temperatures up to 260°C (500°F) and for shorter periods as high as 316°C (600°F).


Directions

TUBE: Surfaces must be clean and dry. Remove cap and cut nozzle to desired size opening. Apply by pushing sealant ahead of nozzle. Tool sealant immediately after application. Sealant can be applied in temperatures as low as –65°C (-85°F) provided the surfaces are dry and frost free. Dry to touch in 30 minutes; cures fully in 24 hours. 

CARTRIDGE: Surfaces must be clean and dry. Cut nozzle for desired bead size at a 45° angle. Using a caulking gun, apply by pushing sealant ahead of nozzle. Tool sealant immediately after application. Sealant can be applied in temperatures as low as –65°C (-85°F) provided the surfaces are dry and frost free. Can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. Dry to touch in 30 minutes; cures fully in 24 hours.
 

Maintenance Products()
+
-
Glass & Masonry Cleaners
+
-
Chimney Cleaners & Conditioners
+
-
Polish & Paint
+
-
Replacement Gaskets
+
-
Cement & Mortar
+
-
Silicone Sealant
+
-
Fire Starters
+
-
Stove & Fireplace Accessories
Downloads
2017 Stove & Fireplace Maintenance products Catalogue 2017 Stove & Fireplace Maintenance products Catalogue 4.36 MB
Hi-temperature Silicone Red (MSDS) Hi-temperature Silicone Red (MSDS) 0.03 MB
Imperial Group
Head Office & Customer Service
1.800.561.3100
Stay
connected
Home
Company
Opportunities
Contact us
Site Map
Support
Awards & Accolades
In the Community
What's New?
Upcoming Events
Registers & Grilles
Venting & Flexible Duct
Stove
Fireplace
Greentek
Imperial Air Technologies
Railing, Columns & Fencing
Galvanized Duct, Pipe & Fittings
Steel Stud, Channel & Trim
Air Filtration
© 2017 Imperial Manufacturing Group|All rights reserved|A NuFocus Online Solution
Content Support
E-mail Now